您的位置: 标准下载 » 国际标准 » BS 英国标准 »
热门标准
下载排行

BS DD ISO/TS 13899-3-2006 钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子体原子发射光谱法.钨含量的测定

作者:标准资料网 时间:2024-05-10 06:51:13  浏览:8033   来源:标准资料网
下载地址: 点击此处下载
【英文标准名称】:Steel-DeterminationofMo,NbandWcontentsinalloyedsteel-Inductivelycoupledplasmaatomicemissionspectrometricmethod-DeterminationofWcontent
【原文标准名称】:钢.合金钢中钼、铌和钨含量的测定.感应耦合等离子体原子发射光谱法.钨含量的测定
【标准号】:BSDDISO/TS13899-3-2006
【标准状态】:现行
【国别】:英国
【发布日期】:2006-12-29
【实施或试行日期】:2006-12-29
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:合金钢;原子发射光谱法;化学分析和试验;含量测定;方法;钼;铌;钢;钨
【英文主题词】:AES;Alloysteels;Atomicemissionspectrometry;Chemicalanalysisandtesting;Determinationofcontent;ICP;Methods;Molybdenum;Niobium;Steels;Tungsten
【摘要】:ThisTechnicalSpecificationspecifiesamethodforthedeterminationoftungstencontentinsteelbymeansofinductivelycoupledplasmaatomicemissionspectrometry.Thismethodisapplicabletotungstencontentsbetween0,1%and20%(massfraction).
【中国标准分类号】:H11
【国际标准分类号】:77_080_20
【页数】:20P;A4
【正文语种】:英语


下载地址: 点击此处下载
返回跳至顶部
Product Code:SAE J2613
Title:Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Low Alloy Steel Hydraulic Tubing, Sub-Critically Annealed for Bending, Double Flaring, and Bending
Issuing Committee:Metallic Tubing Committee
Scope:This SAE Standard covers sub-critically annealed electric resistance welded flash controlled single-wall high strength low alloy steel tubing intended for use in hydraulic pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, cold forming, welding and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead.The grade of material produced to this specification is of micro-alloy content and is considerably stronger and intended to service higher pressure applications than like sizes of the grades of material specified in SAE J356 and SAE J2435. Due to the alloy content of the material, the forming characteristics of the finished tube are equal to or better, when compared to SAE J356 and SAE J2435. Nominal reference working pressures for this tubing are listed in SAE J1065.【英文标准名称】:DigitalEnhancedCordlessTelecommunications(DECT)-Testspecification-Part1:Radio(EndorsementoftheEnglishversionEN300176-1V1.5.1(2003-10)asGermanstandard)
【原文标准名称】:数字增强无线电通信.试验规范.第1部分:无线电
【标准号】:EN300176-1-2003
【标准状态】:现行
【国别】:
【发布日期】:2004-08
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:无线电装置;无线电设备;验收检验;电话系统;数字工程;电信;数字增强无线电通信;接口(数据处理);无线电报;试验;无线电话;试验条件;无线的;电话技术
【英文主题词】:Acceptanceinspection;Cordless;DECT;Digitalengineering;Interfaces(dataprocessing);Radioequipment;Radiosystems;Radiotelegraphy;Radiotelephones;Telecommunication;Telecommunications;Telephonesystems;Telephonetechnics;Testing;Testingconditions
【摘要】:
【中国标准分类号】:M36
【国际标准分类号】:33_070_30
【页数】:2P.;A4
【正文语种】:英语